|
|
Modal Analysis of the Swirl Turbine Rotor Blades
Pekar, Marek ; Chromek, Lukáš (referee) ; Lošák, Petr (advisor)
The aim of this diploma thesis is to determine and compare modal properties of four swirl turbine wheels, each with a different geometry. Natural frequencies and mode shapes were obtained based on computer modelling using Ansys software and they were compared with experimental modal analysis' results. The computer modelling and the experimental modal analysis were carried out for different boundary conditions and in different environments. The beginning of the thesis is dedicated to a brief overview of literature with similar issues. Then a brief introduction of a dynamics theory is mentioned in which equations of motion for a damped and an undamped single degree of freedom system are derived. The creation of a geometry model which is obtained by a reverse engineering is shown in the second part of the thesis. The geometry model was subsequently used for the computer based modelling of the modal parameters. In the third part an experimental equipment, setting, measurement and processing of data are described. The conclusion of the thesis is dedicated to the comparison of the results obtained by the experimental modal analysis and the computing modelling is presented. Moreover, influence of boundary conditions and influence of the environment on the natural frequencies are evaluated.
|
|
|
Analysis of Powertrain Acoustic Properties
Ambróz, Richard ; Novotný, Pavel (referee) ; Dundálek, Radim (referee) ; Píštěk, Václav (advisor)
Dizertačná práca rieši problematiku analýzy akustických vlastností pohonných jednotiek. V úvodnej časti je teoretický rozbor fyzikálnych princípov vibrácií a hluku a prehľad súčasného stavu riešenia problematiky v oblasti návrhu pohonných jednotiek. Vlastná časť práce popisuje konštrukčný návrh elektrodynamického budiča vibrácií, návrh hodnotenia výsledkov merania a taktiež spôsob spracovania výsledkov. Akustické vlastnosti sú hodnotené pomocou normálových rýchlostí kmitania povrchu. V závere práce sú prezentované ukážky využitia metódy v praktických príkladoch spojených s návrhom pohonnej jednotky. Celé riešenie predstavuje ucelený spôsob analýzy vhodný pre rýchle hodnotenie vplyvu konštrukčných úprav na akustické vlastnosti.
|
|
|
Determination of the mechanical properties of the multilayer structure materials with utilization of the sonic resonance method and modal FE analysis
Fodor, Ján ; Lošák, Petr (referee) ; Ševeček, Oldřich (advisor)
Thesis deals with determination of layerwise mechanical properties of composite ceramics by indirect method, namely Youngs modulus. Based on literature review, it was found that a method to determine elastic properties of one or more components of multi layered composites based on experimental modal analysis and finite element modal analysis, or analytical approach exists. Method based on FE modal analysis was applied to ceramic laminate, where it was attempt to determine youngs modulus of one component. Beyond that, it was attempt to determine Youngs moduli of both components using first two bending resonant frequencies. Results were unsatisfying. Sensitivity analysis showed that layers with unknown Youngs modulus were overly sensitive to small changes in input parameters due to their small relative thickness with respect to thickness of laminate and due to location in laminate. Based on this conclusion, recommendations were made with respect to suitable geometry of test specimens.
|
|
| |
|
|
Determination of the mechanical properties of the multilayer structure materials with utilization of the sonic resonance method and modal FE analysis
Fodor, Ján ; Lošák, Petr (referee) ; Ševeček, Oldřich (advisor)
Thesis deals with determination of layerwise mechanical properties of composite ceramics by indirect method, namely Youngs modulus. Based on literature review, it was found that a method to determine elastic properties of one or more components of multi layered composites based on experimental modal analysis and finite element modal analysis, or analytical approach exists. Method based on FE modal analysis was applied to ceramic laminate, where it was attempt to determine youngs modulus of one component. Beyond that, it was attempt to determine Youngs moduli of both components using first two bending resonant frequencies. Results were unsatisfying. Sensitivity analysis showed that layers with unknown Youngs modulus were overly sensitive to small changes in input parameters due to their small relative thickness with respect to thickness of laminate and due to location in laminate. Based on this conclusion, recommendations were made with respect to suitable geometry of test specimens.
|
|
| |
|
|
Analysis of Powertrain Acoustic Properties
Ambróz, Richard ; Novotný, Pavel (referee) ; Dundálek, Radim (referee) ; Píštěk, Václav (advisor)
Dizertačná práca rieši problematiku analýzy akustických vlastností pohonných jednotiek. V úvodnej časti je teoretický rozbor fyzikálnych princípov vibrácií a hluku a prehľad súčasného stavu riešenia problematiky v oblasti návrhu pohonných jednotiek. Vlastná časť práce popisuje konštrukčný návrh elektrodynamického budiča vibrácií, návrh hodnotenia výsledkov merania a taktiež spôsob spracovania výsledkov. Akustické vlastnosti sú hodnotené pomocou normálových rýchlostí kmitania povrchu. V závere práce sú prezentované ukážky využitia metódy v praktických príkladoch spojených s návrhom pohonnej jednotky. Celé riešenie predstavuje ucelený spôsob analýzy vhodný pre rýchle hodnotenie vplyvu konštrukčných úprav na akustické vlastnosti.
|
|
|
Modal Analysis of the Swirl Turbine Rotor Blades
Pekar, Marek ; Chromek, Lukáš (referee) ; Lošák, Petr (advisor)
The aim of this diploma thesis is to determine and compare modal properties of four swirl turbine wheels, each with a different geometry. Natural frequencies and mode shapes were obtained based on computer modelling using Ansys software and they were compared with experimental modal analysis' results. The computer modelling and the experimental modal analysis were carried out for different boundary conditions and in different environments. The beginning of the thesis is dedicated to a brief overview of literature with similar issues. Then a brief introduction of a dynamics theory is mentioned in which equations of motion for a damped and an undamped single degree of freedom system are derived. The creation of a geometry model which is obtained by a reverse engineering is shown in the second part of the thesis. The geometry model was subsequently used for the computer based modelling of the modal parameters. In the third part an experimental equipment, setting, measurement and processing of data are described. The conclusion of the thesis is dedicated to the comparison of the results obtained by the experimental modal analysis and the computing modelling is presented. Moreover, influence of boundary conditions and influence of the environment on the natural frequencies are evaluated.
|
guest ::
